OBD-II stands for On-Board Diagnostics – second generation, and it is a system that is built into every modern car to monitor its performance and engine health. The system is designed to detect problems with the car and report them to the driver via a warning light on the dashboard. One of the codes that can be displayed by the OBD-II system is P0699, which indicates a problem with the sensor reference voltage c circuit. In this article, we will explore what this code means, the symptoms and causes of the issue, and how to repair it.
What is OBD-II Code P0699?
OBD-II code P0699 indicates a problem with the sensor reference voltage c circuit. In most cars, there are several sensors that are responsible for measuring different aspects of the engine’s performance. These sensors rely on a reference voltage to function correctly, and if the voltage is too high, too low, or unstable, it can cause problems with the sensor’s readings, leading to a decrease in engine performance or overall driveability.
Symptoms of OBD-II Code P0699
If your car has a problem with the sensor reference voltage c circuit, you may experience a range of symptoms, from minor to severe. Some of the most common symptoms include:
1. Check engine light – This is the most obvious sign that something is wrong with your car. If the check engine light is on, it could indicate a wide range of issues, including problems with the sensor reference voltage c circuit.
2. Engine misfiring – If you notice that your engine is misfiring or running rough, it could be due to a problem with the sensor reference voltage c circuit. This is because the sensors that rely on this voltage to function correctly may not be reading the engine’s performance accurately.
3. Poor fuel efficiency – If your car is consuming more fuel than usual, it could be due to a decrease in engine performance caused by a problem with the sensor reference voltage c circuit.
4. Reduced power output – If you notice that your car is accelerating more slowly than usual or has reduced power, it could be due to a problem with the sensor reference voltage c circuit.
Causes of OBD-II Code P0699
The most common causes of OBD-II code P0699 are:
1. Wiring issues – If there is a wiring issue with the sensor reference voltage c circuit, it can cause the voltage to be too high, too low, or unstable, leading to problems with the sensors that rely on it.
2. Faulty sensor – If one of the sensors that rely on the sensor reference voltage c circuit is faulty, it can cause the voltage to be unstable, leading to an inaccurate reading of engine performance.
3. Failed PCM – The Powertrain Control Module (PCM) is responsible for controlling the reference voltage for the sensors. If it fails, it can cause problems with the voltage, leading to issues with the sensors that rely on it.
How to Repair OBD-II Code P0699
Repairing OBD-II code P0699 will depend on the specific cause of the issue. Here are some general steps to follow:
1. Check the wiring – Inspect the wiring for any signs of damage, such as frayed wires or corroded connections. Replace any damaged wiring.
2. Test the sensors – Test each of the sensors that rely on the sensor reference voltage c circuit to ensure they are functioning correctly. Replace any faulty sensors.
3. Inspect the PCM – Check the PCM for any signs of damage or failure. If it is faulty, you will need to replace it.
4. Clear the code – Once you have repaired the issue, use an OBD-II scanner to clear the code from the car’s memory.
FAQs Regarding OBD-II Code P0699
1. What does it mean when the check engine light is on?
The check engine light is a warning light that indicates there is a problem with your car’s performance or engine health.
2. How do I know if I have OBD-II code P0699?
If the check engine light is on, you will need to use an OBD-II scanner to read the code.
3. Can I still drive my car with OBD-II code P0699?
It’s best to get the issue fixed as soon as possible. Continuing to drive the car with the issue could cause further damage and decrease overall performance.
4. How much does it cost to repair OBD-II code P0699?
The cost will depend on the specific cause of the issue and the severity of the damage. It’s best to get a professional mechanic to inspect the car and provide an estimate.
5. How can I prevent OBD-II code P0699 from happening?
Regular maintenance, including checking the wiring and testing the sensors, can help to prevent issues with the sensor reference voltage c circuit from occurring.
Conclusion
OBD-II code P0699 indicates a problem with the sensor reference voltage c circuit. If you notice any symptoms of the issue, it’s best to get a professional mechanic to inspect the car and determine the cause. Once the cause has been identified, the mechanic can repair the issue and clear the code from the car’s memory using an OBD-II scanner. Regular maintenance can help to prevent future issues with the sensor reference voltage c circuit from occurring, helping to keep your car running smoothly and efficiently.
20% off Additional Services at Valvoline Instant Oil Change
20% off Cabin Air Filter Replacement at Valvoline Instant Oil Change
