What is OBD-II Code P0B07 – Electric/Auxiliary Transmission Fluid Pump Motor Phase W Current Low
As a mechanic, I often deal with various OBD-II codes when troubleshooting car issues. One of the most common codes I come across is P0B07, which indicates a problem with the electric/auxiliary transmission fluid pump motor phase W current being low. In this article, I will explain what this code means, how to repair the issue, and share some additional information that you may find useful.
What is OBD-II Code P0B07?
OBD-II Code P0B07 is a diagnostic trouble code that is triggered when the electric/auxiliary transmission fluid pump motor phase W current is lower than the expected value. This code is typically found on hybrid or electric vehicles, where the transmission fluid pump motor is responsible for circulating the transmission fluid to keep the transmission cool and lubricated. If the pump motor is not functioning correctly, it can cause serious damage to the transmission, resulting in costly repairs.
Symptoms of Code P0B07
When code P0B07 is triggered, you may notice the following symptoms:
– Illumination of the check engine light
– Reduced power or performance
– Transmission may fail to shift properly or may slip
– Transmission fluid may be dirty or contaminated
– Unusual noises or vibrations coming from the transmission
Causes of Code P0B07
There are several potential causes of code P0B07, including:
– Faulty transmission fluid pump motor
– Malfunctioning pump motor control module
– Poor electrical connection or wiring issue
– Low or contaminated transmission fluid
– Failed transmission fluid temperature sensor
How to Repair Code P0B07
If you have determined that code P0B07 is the cause of your transmission issues, there are a few steps you can take to repair the problem:
1. Inspect the transmission fluid and fluid pump
One of the first things you should do is check the transmission fluid level and condition. If the fluid is low or dirty, you will need to drain and replace it. Additionally, you should inspect the fluid pump motor to see if it is functioning correctly. If the pump motor is not working, it will need to be replaced.
2. Check the pump motor control module
The pump motor control module (PCM) is responsible for controlling the operation of the fluid pump motor. If the PCM is malfunctioning, it can cause issues with the pump motor. You should check the PCM for any signs of damage or wear and tear. If it needs to be replaced, make sure to get one that is compatible with your vehicle’s make and model.
3. Inspect the wiring and electrical connections
If there is a problem with the electrical connection or wiring that is causing the current to be low, it may be necessary to repair or replace the affected parts. You should carefully inspect all of the wiring that is connected to the pump motor and PCM to make sure they are properly connected and not damaged.
4. Test and replace the transmission fluid temperature sensor
The transmission fluid temperature sensor is responsible for measuring the temperature of the transmission fluid. If this sensor is not functioning correctly, it can cause issues with the transmission fluid pump motor. You should test the temperature sensor and replace it if necessary.
Frequently Asked Questions
1. How can I tell if my car has a hybrid or electric transmission?
A: You can usually tell if your car has a hybrid or electric transmission by looking at the vehicle’s specifications or owner’s manual. Alternatively, you can speak to a mechanic or dealership to determine if your car has a hybrid or electric transmission.
2. Can code P0B07 be caused by low transmission fluid?
A: Yes, code P0B07 can be triggered by low transmission fluid. It is important to regularly check and change the transmission fluid in your vehicle to avoid potential issues.
3. Can I continue driving my vehicle with code P0B07?
A: It is not recommended to continue driving your vehicle with code P0B07. The low pump motor current can cause serious damage to the transmission, which can result in expensive repairs.
4. How much does it typically cost to repair code P0B07?
A: The cost to repair code P0B07 can vary depending on the cause of the issue and the make and model of your vehicle. Generally, the cost can range from a few hundred to a few thousand dollars.
5. How can I prevent code P0B07 from occurring?
A: To prevent code P0B07, it is important to properly maintain your vehicle and regularly check and change the transmission fluid. Additionally, you should have your vehicle inspected by a mechanic on a regular basis to detect any potential issues before they become more severe.
In conclusion, OBD-II Code P0B07 can be a serious issue that requires immediate attention. When this code is triggered, it is important to take the necessary steps to diagnose and repair the problem to avoid further damage to your transmission. By following the steps outlined in this article and staying on top of your vehicle’s maintenance, you can help prevent this code from occurring in the future.
20% off Additional Services at Valvoline Instant Oil Change
20% off Cabin Air Filter Replacement at Valvoline Instant Oil Change
