What is OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low
If you have been driving for some time, you must have seen the ‘check engine’ light illuminating on your dashboard at some point. When this light comes on, it means that there’s an issue with the engine, and it’s important to have it checked as soon as possible. One of the codes that could be displayed is the OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low. In this article, we will explore what this code means, its causes, symptoms, and how to fix it.
What is OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low?
OBD-II Code P2315 refers to a fault in the ignition coil F primary control circuit. This is a specific fault code that is only applicable to Ford vehicles. The ignition coil F primary control circuit is responsible for controlling the amount of current that passes through the ignition coil. The control circuit ensures that the ignition coil receives enough current to generate the required spark for combustion. When the control circuit senses that the current in the ignition coil is too low, it triggers the P2315 code.
What are the Causes of OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low?
The ignition coil F primary control circuit low code can be caused by several factors, including:
1. Faulty Ignition Coil: A faulty ignition coil can cause the primary control circuit to malfunction, resulting in the P2315 code.
2. Wiring Issues: Damaged or corroded wiring can cause a decrease in current flow to the ignition coil, resulting in the P2315 code.
3. Loose Connections: Loose or disconnected electrical connections, including the ground wire, can cause the ignition coil F primary circuit to malfunction.
4. Failed PCM: If the Powertrain Control Module (PCM) fails, it may not provide the necessary current to the ignition coil, resulting in the P2315 code.
What are the Symptoms of OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low?
When the P2315 code is triggered, you may notice a few symptoms when driving such as:
1. Rough Idle: The engine may experience a rough idle or may even stall. This can be due to a lack of spark that is required to ignite the air-fuel mixture in the engine cylinders.
2. Poor Acceleration: Since the engine is not getting enough spark, it may struggle to accelerate properly, making it difficult to drive at higher speeds.
3. Misfire: The engine may start to misfire, which can cause shaking or vibrations felt throughout the vehicle.
4. Reduced Fuel Economy: You may notice a reduction in fuel economy as the engine struggles to perform properly.
How to Fix OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low
The following steps can be taken to repair the ignition coil F primary control circuit low issue:
1. Check the Ignition Coil: Visually inspect the ignition coil and look for any signs of damage such as cracks or other physical damage.
2. Check the Wiring: Inspect the wiring connections to the ignition coil to ensure that they are not corroded or damaged.
3. Check the PCM: Test the PCM to ensure that it is functioning correctly. If the PCM has failed, it may need to be replaced.
4. Replace the Ignition Coil: If you have checked the wiring and PCM, but can’t find anything wrong, then the ignition coil may need to be replaced.
5. Erase the Code: After repairing the issue, use an OBD-II scanner to erase the P2315 code from the PCM.
Frequently Asked Questions (FAQs)
Q1. Can I still drive with an OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low code?
A: You can drive with the P2315 code, but you might experience some of the symptoms mentioned earlier. It’s not recommended to drive for long distances with this issue as it can further damage your engine. It is advisable to get the issue repaired as soon as possible.
Q2. How much does it cost to fix the ignition coil F primary control circuit low code?
A: The cost of repair varies depending on the root cause of the issue. If it’s just a wiring issue, it could cost around $100 to $500. However, if it’s a failed PCM, you might have to spend up to $2,000 or more on repairs.
Q3. How do I prevent the ignition coil F primary control circuit low code?
A: Regular maintenance like changing the spark plugs and ignition coils every 60,000 miles can prevent damage, which also prevents this code from occurring. If you detect any issues with your vehicle, take prompt action and have it repaired immediately.
Q4. Can I replace the ignition coil F primary control circuit myself?
A: Although the process is relatively simple, you should have some basic mechanical skills to replace the ignition coil yourself. If you’re unfamiliar with repairing the system, it’s highly recommended to take your vehicle to a professional mechanic.
Q5. Do all vehicles have the ignition coil F primary circuit control?
A: No, the P2315 code is only triggered when there is an issue with the ignition coil F primary circuit in Ford vehicles.
Conclusion
OBD-II Code P2315 – Ignition Coil F Primary Control Circuit Low is a common issue in Ford vehicles. Any time you start experiencing issues like engine shaking, rough idle, poor acceleration, or reduced fuel economy, have your vehicle checked by a mechanic immediately. It might be a case of damaged or corroded wiring, a failed ignition coil or PCM. Regular maintenance on your vehicle goes a long way in preventing these issues, so make it a point to replace the spark plugs and ignition coils every 60,000 miles.
20% off Additional Services at Valvoline Instant Oil Change
20% off Cabin Air Filter Replacement at Valvoline Instant Oil Change
