What is OBD-II Code P2370 – Fuel Volume Regulator B Control Circuit/Open
OBD-II or On-Board Diagnostics – II is a standardized system that diagnoses and reports issues related to powertrain, body, chassis, and network control systems in vehicles. The OBD-II code P2370 refers to a problem in the fuel volume regulator B control circuit which causes the fuel volume regulator to remain open. This article will discuss what this code means, its possible causes, symptoms, and how to repair it.
What is Fuel Volume Regulator B Control System?
The fuel volume regulator is an essential component of the fuel system in modern vehicles. It controls the pressure and volume of fuel flowing through the fuel injectors. In gasoline EFI engines, the fuel volume regulator is usually located on the fuel rail. The fuel volume regulator B control circuit is responsible for managing the fuel volume regulator’s operation.
What does OBD-II Code P2370 mean?
OBD-II Code P2370 indicates a problem with the fuel volume regulator B control circuit. The fuel volume regulator is an electronic device with a solenoid that controls fuel pressure and volume going to the fuel injector. The fuel volume regulator B control circuit controls the voltage or duty cycle that toggles the solenoid on and off. If the fuel volume regulator B control circuit malfunctions, it results in the regulator remaining open, causing the fuel pressure and volume to be wrong, resulting in engine performance problems.
What Causes OBD-II Code P2370?
There are several reasons why OBD code P2370 could occur in a vehicle. Some of the most common causes are:
1. Faulty fuel volume regulator B control circuit.
2. Damaged fuel volume regulator.
3. Low fuel pressure caused by a defective fuel pump.
4. Clogged fuel filter.
5. A short or open in the fuel volume regulator circuit wiring.
6. A malfunctioning fuel injector driver circuit.
Symptoms of OBD-II Code P2370
After the check engine light comes on, you should check the fuel delivery system’s operation. However, you might also notice the following symptoms:
1. Engine misfiring.
2. Difficulty starting the engine.
3. Decreased fuel efficiency.
4. Stalling while driving.
5. The engine hesitates or lacks power during acceleration.
6. The check engine light comes on.
How to Diagnose OBD-II Code P2370?
To diagnose the source of the problem, a mechanic should follow a diagnostic procedure similar to the following:
1. Follow manufacturer diagnostic procedures.
2. Use an OBD-II scanner to check for other related codes.
3. Inspect the fuel system for proper fuel pressure and volume flow.
4. Test voltage and resistance at the fuel volume regulator control circuit.
5. Test the fuel volume regulator’s operation.
6. Check the wiring harness and connections for damage or corrosion.
7. Inspect and test the fuel injector driver control circuit.
How to Repair OBD-II Code P2370
Once the underlying problem has been identified, it’s time to repair it. Depending on the cause of the problem, below are some of the repair options:
1. Replace the fuel volume regulator.
2. Repair or replace the fuel pump or fuel filter.
3. Replace the wiring harness and connectors.
4. Replace the fuel injector driver control module.
Frequently Asked Questions
1. What does OBD-II Code P2370 mean?
OBD-II Code P2370 indicates a problem with the fuel volume regulator B control circuit.
2. What causes OBD-II Code P2370?
The most common causes are a faulty fuel volume regulator B control circuit, damaged fuel volume regulator, low fuel pressure caused by a defective fuel pump, clogged fuel filter, a short or open in the fuel volume regulator circuit wiring, and a malfunctioning fuel injector driver circuit.
3. What are the symptoms of OBD-II Code P2370?
Symptoms of code P2370 include engine misfiring, difficulty starting the engine, decreased fuel efficiency, stalling while driving, engine hesitation or lack of power during acceleration, and the check engine light coming on.
4. How to diagnose OBD-II Code P2370?
A mechanic should follow a diagnostic procedure similar to inspecting the fuel system for proper fuel pressure and volume flow, testing voltage and resistance at the fuel volume regulator control circuit, testing the fuel volume regulator’s operation, checking the wiring harness and connections for damage or corrosion, and inspecting and testing the fuel injector driver control circuit.
5. How to repair OBD-II Code P2370?
Depending on the cause of the problem, repair options may include replacing the fuel volume regulator, repairing or replacing the fuel pump or fuel filter, replacing the wiring harness and connectors, or replacing the fuel injector driver control module.
20% off Additional Services at Valvoline Instant Oil Change
20% off Cabin Air Filter Replacement at Valvoline Instant Oil Change
