What is OBD-II Code P2437 – AIR System Air Flow/Pressure Sensor Circuit Low Bank 2


What is the OBD-II Code P2437 – AIR System Air Flow/Pressure Sensor Circuit Low Bank 2?

As a car owner, it is never pleasant to see the check engine light come on. However, this warning light serves as a way to communicate with you, informing you that there is an issue in your vehicle. When the check engine light illuminates, it means that the On-Board Diagnostic (OBD) system in your vehicle has detected a problem. One of the codes that you may see is the OBD-II Code P2437 – AIR System Air Flow/Pressure Sensor Circuit Low Bank 2, which is the focus of this article.

The AIR system, which stands for the Air Injection Reactor, is an emission control system in modern vehicles that operates by injecting air into the vehicle’s exhaust system. This ensures that any unburnt fuel that has entered the exhaust system is burned. The oxygen sensors, along with the AIR system, work together to combat air pollution. When the OBD system detects a problem in the AIR system, it sets the P2437 error code and illuminates the check engine light in your car.

What Does the OBD-II Code P2437 – AIR System Air Flow/Pressure Sensor Circuit Low Bank 2 Mean?

The OBD-II Code P2437 is a generic diagnostic trouble code that is found in most vehicles produced after 1996. The code relates to the bank 2 side of the engine and refers to a low circuit voltage for the air flow/pressure sensor in the AIR system. Bank 2 refers to the side of the engine that contains the cylinder bank that is not used during the compression stroke. The engine control module (ECM) receives signals from the air flow/pressure sensor in the air injection system, and if one or both of the signals are low, it sets the P2437 error code.

The airflow/pressure sensor plays a vital role in regulating the amount of air flowing through the AIR system. The computer uses the signal from the sensor to adjust the air injection valve opening time and the amount of air injected into the exhaust system. If the sensor is reading low, that means the AIR system is not injecting the right amount of air into the exhaust system, and the engine will be running richer than expected, which will lead to higher fuel consumption. Furthermore, if the sensor is reading low, the AIR system may be injecting less air into the exhaust system than is required, which would lead to an increase in harmful emissions.

What are the Symptoms of P2437 AIR System Air Flow/Pressure Sensor Circuit Low Bank 2?

Many different symptoms could be caused by the P2437 AIR System Air Flow/Pressure Sensor Circuit Low Bank 2. The most common symptoms include:

1. Illuminated Check Engine Light – This is the most common symptom, and it is usually the first indication that there is a problem with your vehicle. When the check engine light comes on, it is best to have your car checked by a professional mechanic.

2. Rough Running Engine – A rough idle or difficulty starting the engine could signify a problem in the AIR system.

3. Poor Fuel Economy – A low airflow/pressure sensor reading may cause the engine to burn more fuel than necessary, leading to poor fuel economy.

4. Reduced Power Output – A misfiring engine or a vehicle that is not running efficiently could lead to a reduction in power output.

How to Repair the P2437 AIR System Air Flow/Pressure Sensor Circuit Low Bank 2?

If your vehicle is displaying the OBD-II Code P2437, the airflow/pressure sensor, the wiring and the connector of the AIR system should be inspected. If the wiring and connector are visually checked and they appear to be intact, then the airflow/pressure sensor should be inspected. Replacing the sensor can sometimes fix the P2437 code, but it is not always necessary to do so.

The first step in repairing the P2437 code is to reset the code and run a drive cycle to see if it re-occurs. This is done to ensure it was not just a fluke. If the code re-occurs, then the airflow/pressure sensor should be inspected. The sensor should be tested to see if it is emitting the correct voltage or if it has a low circuit voltage. The voltage test will provide a good indication of whether the sensor should be replaced. If the sensor is found to be defective, it should be replaced with a new one.

After installing the new airflow/pressure sensor, the code should be reset and a drive cycle performed to ensure that the code doesn’t come back. If the code does not re-occur, then the repair was successful, and the vehicle is good to go.

Frequently Asked Questions about the P2437 AIR System Air Flow/Pressure Sensor Circuit Low Bank 2

Q: Is it safe to drive a car displaying the OBD-II Code P2437?
A: If your vehicle is displaying the P2437 code, you should avoid driving your car until it is inspected by a mechanic. This will prevent further complications and avoid the engine from becoming damaged.

Q: What happens if I ignore the P2437 code?
A: Ignoring the OBD-II Code P2437 may lead to more severe problems, such as damage to the oxygen sensor, a decrease in fuel efficiency, and a misfire in the engine. Therefore, it is in your best interest to have the issue repaired promptly.

Q: Can a low circuit voltage cause the OBD-II Code P2437?
A: Yes, a low circuit voltage can trigger the OBD-II Code P2437 in the AIR System Air Flow/Pressure Sensor Circuit Low Bank 2 error code. To resolve the issue, it is necessary to inspect the wiring and connections first.

Q: Will a bad air pump cause the P2437 code error?
A: If the air pump isn’t working correctly, it may cause the OBD-II Code P2437 to appear, but it is not the only cause. If your vehicle is displaying the P2437 code, it is best to have it inspected by a mechanic to determine the root cause of the problem.

Q: How much does it cost to fix P2437 AIR System Air Flow/Pressure Sensor Circuit Low Bank 2?
A: The cost of repairing the OBD-II Code P2437 will vary depending on the make and model of your vehicle, as well as the cost of parts and labor in your area. It is best to have an experienced mechanic take a look at your vehicle to diagnose the problem and give an accurate estimate of the repair cost.

Conclusion

The OBD-II Code P2437 signifies a problem in your vehicle’s AIR system, specifically related to the air flow/pressure sensor circuit low bank 2. It is necessary to have the issue repaired promptly to prevent further complications. In the event of seeing this code, it is recommended to have your car checked by an expert mechanic. Inspect the wiring and connection first before replacing the airflow sensor. With proper diagnosis and repair, your vehicle will be back to running smoothly in no time.

Scroll to Top