What is OBD-II Code P2607 – Intake Air Heater B Circuit Low


Code P2607 is one of the many OBD-II codes that you might encounter while checking your car’s engine. This code indicates that the Intake Air Heater B Circuit is low, which means that there is a problem with the car’s air heating system. If you find code P2607 on your car’s engine, don’t panic. This guide will provide you with a comprehensive explanation of the code and how to repair it.

Understanding OBD-II code P2607

The OBD-II code P2607 is a diagnostic trouble code (DTC) that is stored when the Powertrain Control Module (PCM) detects a malfunction in the Intake Air Heater B Circuit. The Intake Air Heater is a component of the secondary air injection system on some vehicles.

The Intake Air Heater is an electric heater that is mounted in the cold air intake of the engine. Its purpose is to heat the air that enters the engine to improve cold start emissions. When the engine coolant temperature sensor detects a cold engine, the PCM energizes the Intake Air Heater. The heater is turned off when the engine coolant temperature sensor detects that the engine has warmed up.

There are many reasons why the Intake Air Heater B Circuit might produce a low voltage. In most cases, it is due to a failed Intake Air Heater relay, a faulty Intake Air Heater B Circuit, or a defective PCM. Other possible causes include damaged wiring, short circuits, or poor connections.

How to repair OBD-II code P2607

Once you have diagnosed the problem and found the cause of the code, you can now proceed to repair it. Here’s how:

Step 1: Check the wiring

The first step is to check the wiring. Look for any damaged or corroded wires, loose connections, or short circuits. If you find any issues, repair or replace the wiring.

Step 2: Check the Intake Air Heater B Circuit

The next step is to check the Intake Air Heater B Circuit. Use a multimeter to measure the voltage on the circuit. The voltage should be 12 volts when the engine is cold and 0 volts when the engine is warm. If the voltage is low, it means that the circuit is not functioning properly. Replace the circuit if it is damaged.

Step 3: Replace the Intake Air Heater relay

If the wiring and circuit are in good condition, the next step is to replace the Intake Air Heater relay. The relay is responsible for energizing the Intake Air Heater. A faulty relay can cause the Intake Air Heater B Circuit to fail.

Step 4: Replace the PCM

If all the above steps fail to repair the problem, the last resort is to replace the PCM. The PCM controls the engine’s electrical system and can sometimes be the cause of the Intake Air Heater B Circuit low voltage problem. Replace the PCM only if all other possibilities have been eliminated.

Frequently Asked Questions about OBD-II code P2607

1. What does OBD-II code P2607 mean?

Code P2607 means that the Intake Air Heater B Circuit has a low voltage. It is a DTC that is stored when the PCM detects a malfunction in the circuit.

2. What is the Intake Air Heater?

The Intake Air Heater is an electric heater that heats the air that enters the engine to improve cold start emissions. It is a component of the secondary air injection system on some vehicles.

3. What are the possible causes of OBD-II code P2607?

The possible causes include a faulty Intake Air Heater relay, a damaged Intake Air Heater B Circuit, a defective PCM, damaged wiring, short circuits, or poor connections.

4. How do I repair OBD-II code P2607?

You can repair the code by checking the wiring, checking the Intake Air Heater B Circuit, replacing the Intake Air Heater relay, or replacing the PCM.

5. Can I still drive my car if I have OBD-II code P2607?

Yes, you can still drive your car if you have code P2607. However, the problem should be addressed as soon as possible to prevent further damage to the engine.

Conclusion

Code P2607 is a common OBD-II code that indicates a problem with the Intake Air Heater B Circuit. If you encounter this code, don’t panic. Use the steps outlined in this guide to diagnose the problem and repair it. Remember to always follow safety procedures when working on your car to prevent accidents or injuries.

Scroll to Top