What is OBD-II Code P27EA – Transmission Range Control B Circuit High?
As a mechanic, when a customer brings in a car with a check engine light on, the first step is to connect a diagnostic tool to the vehicle’s onboard computer system. The tool generates a code that provides insight into what is causing the light to turn on. One of the codes that we often come across is OBD-II Code P27EA – Transmission Range Control B Circuit High, which indicates a problem with the transmission range sensor.
The transmission range sensor plays a crucial role in the operation of an automatic transmission. It provides key information to the vehicle’s computer system about the position of the gear selector lever, allowing the system to determine which gear the car should be in. If the transmission range sensor fails or malfunctions, it can cause a range of issues, including rough shifting and a failure to shift into the correct gear.
What Causes OBD-II Code P27EA – Transmission Range Control B Circuit High to Trigger?
There are several potential causes of OBD-II Code P27EA – Transmission Range Control B Circuit High, including a faulty range sensor, a malfunctioning transmission control module, or an issue with the wiring or connections between the two components.
A common cause is a fault in the transmission range sensor circuit, which can be caused by a broken circuit, a loose or poor connection, or a damaged sensor. Water or debris may also have entered the connection, leading to corrosion and poor conductivity.
How Can I Fix OBD-II Code P27EA – Transmission Range Control B Circuit High?
The first step in fixing OBD-II Code P27EA is to inspect the transmission range sensor and TCM for any signs of damage or corrosion. It’s a good idea to clean the sensor and surrounding wiring with electrical contact cleaner and test the circuits to ensure they are functioning properly.
If no visible damage is found, the next step is to replace the transmission range sensor. This may require removing other components to gain access to the sensor.
If the issue persists after replacing the sensor, the problem may lie in the TCM or the wiring between the sensor and the TCM. In this case, it’s best to seek the assistance of a professional mechanic who can perform more in-depth diagnostics to identify the root cause of the problem.
Why is OBD-II Code P27EA – Transmission Range Control B Circuit High Important?
OBD-II Code P27EA – Transmission Range Control B Circuit High is an important indicator of a problem with the transmission range sensor or the circuit that controls it. Left unaddressed, this issue can cause further damage to the transmission and lead to more costly repairs down the line.
In addition, failure to address this issue can lead to transmission slipping, difficulty shifting, and even complete transmission failure. This can result in a compromised driving experience, lower fuel efficiency, and potentially hazardous driving conditions.
What are Some Symptoms of OBD-II Code P27EA – Transmission Range Control B Circuit High?
Common symptoms associated with OBD-II Code P27EA – Transmission Range Control B Circuit High include:
– The check engine light turning on
– Transmission slipping or difficulty shifting
– Loss of power or acceleration
– Rough shifting while driving
– The transmission may not shift into the correct gear
– Reduced fuel efficiency
If you experience any of these symptoms, it’s important to have your vehicle checked by a professional mechanic as soon as possible.
Frequently Asked Questions About OBD-II Code P27EA – Transmission Range Control B Circuit High
1. Can I continue to drive my car if OBD-II Code P27EA – Transmission Range Control B Circuit High is triggered?
While you may be able to continue driving your car with this issue, it is not recommended. Driving with a malfunctioning transmission range sensor can lead to further damage to your transmission and could cause unsafe driving conditions.
2. How much will it cost to repair OBD-II Code P27EA – Transmission Range Control B Circuit High?
The cost of repairing this issue can vary depending on the cause of the problem. In some cases, a simple fix such as cleaning the sensor and connections may solve the issue. In more severe cases that require replacing the sensor or the TCM, the cost can range from a few hundred to over a thousand dollars.
3. Will replacing the transmission range sensor fix OBD-II Code P27EA – Transmission Range Control B Circuit High?
In many cases, replacing the transmission range sensor will fix the issue. However, if the problem persists, further diagnostics may be required to identify the root cause of the problem.
4. Is it safe to drive with the check engine light on?
It’s generally not recommended to drive with the check engine light on as it signals an issue with the vehicle that requires attention. However, if you need to drive your vehicle, be sure to have it checked by a professional mechanic as soon as possible.
5. Can I diagnose OBD-II Code P27EA – Transmission Range Control B Circuit High myself?
While you can purchase a diagnostic tool and attempt to diagnose the issue yourself, it’s not recommended for individuals with limited knowledge or experience working on cars. Identifying the root cause of the issue requires in-depth knowledge of the vehicle’s electrical system and transmission, and incorrect diagnosis or repair attempts can lead to further damage.
20% off Additional Services at Valvoline Instant Oil Change
20% off Cabin Air Filter Replacement at Valvoline Instant Oil Change
